Hw-module Slot

• Hw-module Location 0/0/cpu0 Port-mode
• Hw-module Subslot
• Hw-module Session
• Hw-module Slot 1 Oversubscription

Hw Module Slot R0 Stop, sd gundam slot expander, high poker stakes 2020, best casino diwip. The hw-module slot stop command in EXEC mode automatically stops traffic on the interfaces and deactivates them along with the SPA in preparation for OIR. In similar fashion, you do not need to independently restart any interfaces on a SPA after OIR of a SPA or SIP. Enter the show facility-alarm status command.

The Catalyst 6840-X-LE-40G and 6824-X-LE-40G have two native 40-Gb ports.

These ports can be converted to 8x10G ports, starting from Cisco IOS Software Release 15.2(2) SY2, by simply changing the operation mode from ‘FortyGigabitEthernet mode' to ‘TenGigabitEthernet mode'. The following output provides an example.

Note:Changing the operation mode will reset the whole chassis; all 40G ports configuration will be lost.

Performance Mode

The Cisco Catalyst 6840-X Series has two performance modes: oversubscription mode and performance mode.

Note that these modes affect port groups rather than an individual port.

By default, the module operates in oversubscription mode since a backplane capacity of 80 GB per DFC4-E feeds 16×10 Gigabit Ethernet ports, resulting in a 2:1 oversubscription ratio.

The default port performance mode can be identified using a show command:

Performance mode can be enabled by issuing a configuration command that will result in shutting down certain ports in the selected port group so as to make the port-to-fabric bandwidth come down from 2:1 to 1:1. The second half of the port group will be disabled when configuring performance mode. (for instance, configuring port group 2 on the Catalyst 6816-X-LE will disable ports 13, 14, 15, and 16, and will be available on ports 9, 10, 11, and 12. The ratio will be a 1:1 port-to-fabric bandwidth.

The Catalyst 6840-X series chassis provides extremely high levels of scalability and performance, with the size and economics of an innovative fixed architecture. This unique platform offers 10-Gb port density; full IPv4/IPv6 and MPLS/VPLS functionality with large table sizes (up to 256,000 Forwarding Information Base [FIB] entries); and more than 15 years of best-in-class features.

With a full suite of Layer 2 and 3, virtualization, security, multicast, IPv6, application visibility, smart operations, and rich media services, the Cisco Catalyst 6840-X delivers superior capabilities from its first day of deployment.

More info from https://www.cisco.com/c/dam/en/us/products/collateral/switches/catalyst-6800-series-switches/white-paper-c11-737288.pdf

More Related My wonderful Kiwi Cattools is doing configuration backup of devices every 15 minutes. Two times till now it happened to me that different ASA SSM modules are stopping to respond on ssh configuration requests.
After getting the status of the module; the status show up as: Unresponsive
fw-01# show module 1 details
Getting details from the Service Module, please wait..
Unable to read details from slot 1
ASA 5500 Series Security Services Module-20
Model: ASA-SSM-20
Hardware version: 1.0
Serial Number: JAF1535CKBP
Firmware version: 1.0(11)5
Software version: 7.1(6)E4
MAC Address Range: 44d3.ca8e.06f8 to 44d3.ca8e.06f8
App. name: IPS
App. Status: Not Applicable
App. Status Desc: Not Applicable
App. version: 7.1(6)E4
Data plane Status: Not Applicable
Status: Unresponsive
Only way to do it is to reset the module using command:

fw-01# show module 1 details
Getting details from the Service Module, please wait..
Unable to read details from slot 1
ASA 5500 Series Security Services Module-20
Model: ASA-SSM-20
Hardware version: 1.0
Serial Number: JAF1535CKBP
Firmware version: 1.0(11)5
Software version: 7.1(6)E4
MAC Address Range: 44d3.ca8e.06f8 to 44d3.ca8e.06f8
App. name: IPS
App. Status: Not Applicable
App. Status Desc: Not Applicable
App. version: 7.1(6)E4
Data plane Status: Not Applicable
Status: Down

fw-01# hw-module module 1 reset
The module in slot 1 should be shut down before
resetting it or loss of configuration may occur.
Reset module in slot 1? [confirm]
Reset issued for module in slot 1

Now you need to wait for a while (about2 minutes during Initialization state):
fw-01# show module 1 details
Getting details from the Service Module, please wait..
Unable to read details from slot 1
ASA 5500 Series Security Services Module-20
Model: ASA-SSM-20
Hardware version: 1.0
Serial Number: JAF1535CKBP
Firmware version: 1.0(11)5
Software version: 7.1(6)E4
MAC Address Range: 44d3.ca8e.06f8 to 44d3.ca8e.06f8
App. name: IPS
App. Status: Not Applicable
App. Status Desc: Not Applicable
App. version: 7.1(6)E4
Data plane Status: Not Applicable
Status: Init

Hw-module Location 0/0/cpu0 Port-mode

After about 2 minutes you will get correct status output for SSM module:
fw-01# show module 1 details
Getting details from the Service Module, please wait..
ASA 5500 Series Security Services Module-20
Model: ASA-SSM-20
Hardware version: 1.0
Serial Number: JAF1535CKBP
Firmware version: 1.0(11)5
Software version: 7.1(6)E4
MAC Address Range: 44d3.ca8e.06f8 to 44d3.ca8e.06f8
App. name: IPS
App. Status: Up
App. Status Desc: Normal Operation
App. version: 7.1(6)E4
Data plane Status: Up
Status: Up
Mgmt IP addr: 10.10.212.21
Mgmt Network mask: 255.255.255.0
Mgmt Gateway: 10.10.212.1
Mgmt Access List: 10.20.150.0/23
Mgmt Access List: 10.30.150.0/23
Mgmt web ports: 443
Mgmt TLS enabled: true

Hw-module Subslot

Useful links:

Hw-module Session

1. Configuring the ASA 5500 AIP SSM

• Hw-module Location 0/0/cpu0 Port-mode
• Hw-module Subslot
• Hw-module Session
• Hw-module Slot 1 Oversubscription

Hw Module Slot R0 Stop, sd gundam slot expander, high poker stakes 2020, best casino diwip. The hw-module slot stop command in EXEC mode automatically stops traffic on the interfaces and deactivates them along with the SPA in preparation for OIR. In similar fashion, you do not need to independently restart any interfaces on a SPA after OIR of a SPA or SIP. Enter the show facility-alarm status command.

The Catalyst 6840-X-LE-40G and 6824-X-LE-40G have two native 40-Gb ports.

These ports can be converted to 8x10G ports, starting from Cisco IOS Software Release 15.2(2) SY2, by simply changing the operation mode from ‘FortyGigabitEthernet mode' to ‘TenGigabitEthernet mode'. The following output provides an example.

Note:Changing the operation mode will reset the whole chassis; all 40G ports configuration will be lost.

Performance Mode

The Cisco Catalyst 6840-X Series has two performance modes: oversubscription mode and performance mode.

Note that these modes affect port groups rather than an individual port.

By default, the module operates in oversubscription mode since a backplane capacity of 80 GB per DFC4-E feeds 16×10 Gigabit Ethernet ports, resulting in a 2:1 oversubscription ratio.

The default port performance mode can be identified using a show command:

Performance mode can be enabled by issuing a configuration command that will result in shutting down certain ports in the selected port group so as to make the port-to-fabric bandwidth come down from 2:1 to 1:1. The second half of the port group will be disabled when configuring performance mode. (for instance, configuring port group 2 on the Catalyst 6816-X-LE will disable ports 13, 14, 15, and 16, and will be available on ports 9, 10, 11, and 12. The ratio will be a 1:1 port-to-fabric bandwidth.

The Catalyst 6840-X series chassis provides extremely high levels of scalability and performance, with the size and economics of an innovative fixed architecture. This unique platform offers 10-Gb port density; full IPv4/IPv6 and MPLS/VPLS functionality with large table sizes (up to 256,000 Forwarding Information Base [FIB] entries); and more than 15 years of best-in-class features.

With a full suite of Layer 2 and 3, virtualization, security, multicast, IPv6, application visibility, smart operations, and rich media services, the Cisco Catalyst 6840-X delivers superior capabilities from its first day of deployment.

More info from https://www.cisco.com/c/dam/en/us/products/collateral/switches/catalyst-6800-series-switches/white-paper-c11-737288.pdf

More Related My wonderful Kiwi Cattools is doing configuration backup of devices every 15 minutes. Two times till now it happened to me that different ASA SSM modules are stopping to respond on ssh configuration requests.
After getting the status of the module; the status show up as: Unresponsive
fw-01# show module 1 details
Getting details from the Service Module, please wait..
Unable to read details from slot 1
ASA 5500 Series Security Services Module-20
Model: ASA-SSM-20
Hardware version: 1.0
Serial Number: JAF1535CKBP
Firmware version: 1.0(11)5
Software version: 7.1(6)E4
MAC Address Range: 44d3.ca8e.06f8 to 44d3.ca8e.06f8
App. name: IPS
App. Status: Not Applicable
App. Status Desc: Not Applicable
App. version: 7.1(6)E4
Data plane Status: Not Applicable
Status: Unresponsive
Only way to do it is to reset the module using command:

hw-module module 1 shutdown

Shutdown module in slot 1? [confirm]
Shutdown issued for module in slot 1

fw-01# show module 1 details
Getting details from the Service Module, please wait..
Unable to read details from slot 1
ASA 5500 Series Security Services Module-20
Model: ASA-SSM-20
Hardware version: 1.0
Serial Number: JAF1535CKBP
Firmware version: 1.0(11)5
Software version: 7.1(6)E4
MAC Address Range: 44d3.ca8e.06f8 to 44d3.ca8e.06f8
App. name: IPS
App. Status: Not Applicable
App. Status Desc: Not Applicable
App. version: 7.1(6)E4
Data plane Status: Not Applicable
Status: Down

fw-01# hw-module module 1 reset
The module in slot 1 should be shut down before
resetting it or loss of configuration may occur.
Reset module in slot 1? [confirm]
Reset issued for module in slot 1

Now you need to wait for a while (about2 minutes during Initialization state):
fw-01# show module 1 details
Getting details from the Service Module, please wait..
Unable to read details from slot 1
ASA 5500 Series Security Services Module-20
Model: ASA-SSM-20
Hardware version: 1.0
Serial Number: JAF1535CKBP
Firmware version: 1.0(11)5
Software version: 7.1(6)E4
MAC Address Range: 44d3.ca8e.06f8 to 44d3.ca8e.06f8
App. name: IPS
App. Status: Not Applicable
App. Status Desc: Not Applicable
App. version: 7.1(6)E4
Data plane Status: Not Applicable
Status: Init

Hw-module Location 0/0/cpu0 Port-mode

After about 2 minutes you will get correct status output for SSM module:
fw-01# show module 1 details
Getting details from the Service Module, please wait..
ASA 5500 Series Security Services Module-20
Model: ASA-SSM-20
Hardware version: 1.0
Serial Number: JAF1535CKBP
Firmware version: 1.0(11)5
Software version: 7.1(6)E4
MAC Address Range: 44d3.ca8e.06f8 to 44d3.ca8e.06f8
App. name: IPS
App. Status: Up
App. Status Desc: Normal Operation
App. version: 7.1(6)E4
Data plane Status: Up
Status: Up
Mgmt IP addr: 10.10.212.21
Mgmt Network mask: 255.255.255.0
Mgmt Gateway: 10.10.212.1
Mgmt Access List: 10.20.150.0/23
Mgmt Access List: 10.30.150.0/23
Mgmt web ports: 443
Mgmt TLS enabled: true

Hw-module Subslot

Useful links:

Hw-module Session

1. Configuring the ASA 5500 AIP SSM
2. Configuring the ASA 5500 AIP SSM - PDF

Hw-module Slot 1 Oversubscription